Support

90% of our users say that a quick search solved their problem!

What is 'drive lock'?

Drive lock is a feature that is available in all Compustar systems. This mode activates the ignition controlled door locks. In this mode the doors will lock as soon as you press the foot brake, while the vehicle key is in the ignition. Also, once the key is taken out of the ignition and the vehicle is shut off the doors will automatically unlock.

How to activate drive lock:

  1. Have the vehicle turned off and the doors closed.
  2. Press the lock and the key buttons (I & IV) at the same time. (press and release DON'T press and hold) 
  3. You should receive one parking light flash to show you are entering drive lock mode. 

-If you receive 3 parking light flashes or the LCD remote reads 'fail' on step 3:

In order to enter drive lock the feature must be turned on in the Compustar control module. This feature is automatically set to off and must be turned on by the installer in order for this mode to be activated. If your LCD remote reads “fail” or if you are receiving 3 parking light flashes on step 3 it may be due to the feature being turned off. In this case it is required to visit your local dealer or original installer in order to have them change the programming in the brain and turn the passive arming feature on.

How to deactivate drive lock:

  1. Have the vehicle turned off and the doors closed, unlock the vehicle or disarm the alarm system by pressing unlock on your remote.
  2. Press the lock and the key buttons (I & IV) at the same time. (press and release DON'T press and hold) 
  3. You should receive two parking light flashes to show you are exiting the drive lock mode.

NOTE: if you have a remote with the 'F' key this feature will be activated differently. 

2W901R-SS

2W902R-SP

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Powered by Zendesk