By default the parking lights will flash three times, pause, and then have a second set of flashes. In this situation, please pay close attention to the second set.
The flashes will indicate an error code, so please check the table below and click on the issue you are encountering for a solution:
| # of Flashes | Error |
| 1 or 8 | Tach sensing issue |
| 2 | Key in ignition position |
| 3 | Door Open (manual transmission only) |
| 4 | Trunk open |
| 5 | Foot brake on |
| 6 | Hood open |
| 7 | Reservation off |
| 10 | Valet mode |
Thank you.
I'm getting the trunk open code on a Chevy suburban. The tailgate is closed. Is there away to disable the tailgate option
I'm getting the trunk open code on a Chevy suburban. The tailgate is closed. Is there away to disable the tailgate option
Not getting any flash on the second set, when i try to remote start i can hear the door lock then the dashboard flashes for a second and lock appear again and that's it .. There is No try to start the engine ..Please help
Hi Naim,
Are you able to lock and unlock your doors? If so, the car could be in Valet mode. Please try the following:
Close all doors
Turn the key to the ‘ON/RUN’ position and press the foot brake down 10 times within 10 seconds.
Remove the key from ignition and try to remote start the vehicle.
Thank you.
4 Comments