Reservation mode must be set in order to remote start a manual transmission vehicle. If you have a Push-to-start manual vehicle, please follow the steps below:
- Park the vehicle and set the emergency brake
- Remove pressure from the foot brake and clutch.
- Press & hold remote start button for 3 seconds on your Compustar remote.Parking lights will flash twice if done correctly.
- Exit the vehicle and close the door. The vehicle will automatically lock/arm the system when entering reservation mode within 10 seconds.
NOTE: Remember to set this every time you would like to remote start your vehicle. The transmission must be left in the neutral position, the vehicle's windows must be rolled up, and the door pins must be in working order.
If you continue to have issues, please visit a Local Dealer or the original installer for assistance.